Superior Tanks 15 Year Warranty - 1800 464 018

Your Superior Tank has been manufactured to the highest standards utilizing advanced technology and production procedures.

1.Terms of Warranty

Subject to clauses 2, 3 and 4 the manufactuer(Superior Tank Supplies Pty Ltd) warrants that the Polyethylene Tanks will perform the function for which it is designed , namely, holding potable water at ambient rainwater temperatures for a period of 15 years from the date of purchase.

2. Non-Excludable Warranties

2.1 This warranty is independent of and does not exclude, limit, restrict or modify any Non-Excludable Warranties under th Trade Practic Act 1974. The manufacturer does not exclude, limit, restrict or modify any Non-Excludable Warranties.

3.Exclusions Limitations of Liability

3.1 Except for the Non-Excludable Warranties, the Manufacturer excluded all other conditions and warranties implied by:
(a) custom; or
(b) the general law 9 including but without any liability for negligence); or
(c) statue

3.2 the liabiltiy under the Warranty by the Manufacturer is exluced to the extent that any defect has been caused or contributed to by;
(a) Improper tank installation, incorrect base preparation or base deterioration (review the manufacturers site preparation and maintenance guidelines);
(b) any tank damage caused by inclement weather, vermin or other pests, and any undermining of the base of the tank through any cause whatsoever;
(c) the use of the tank for any other purpose than that of storing static water in a fixed postion at ambient temperatures;
(d) the repositioning of the tank from its original position;
(e) weathering or degradation of the tank due to extreme climatic conditions;
(f) any accident, contamination, tampering, willful damage, improper storage, improper use (including but without limitation the caring of water) or negligent act of, of omission by, any person other than the manufacturer; or
(g) any discolorationthat may occur from trees or ash fall-out from fires or the like

3.3 The liability of the Manufacturer under this warranty is limited to;
(a) repairing the tank; or
(b) replacing the tank at no cost to the customer; or
(c) reimbursing the Puchaser on a pro-rata basis a sum equal to the purchase price less 7.5% of the purchase price for each year since the purchase date

3.4 Without limiting the generality of clause3.2;
(a) to the extent that any component or material (including, but without limitation the polyethylene) used in the manufacture of the tank is supplied and /or manufactured by a third party, the liability of Manufacturer is limited to the Manufacturer's right of redress(if any) against the third party supplier/manufacturer; and
(b) the Manufacturer will not be liable for any personal injury, incidental damages, consequential losses, water loss, loss of profit or any like claims whatsoever arising from any use of, or incidental to, the Tank.

4. Proof of Purchase
When making any claim on this warranty the original invoice or other similar proof of purchase must be provide by the purchases.

5.Ownership
the Manufacturer retains ownership of all goods sold until full payment has been made by the purchaser.

6.Imperfections
This warranty does not apply to any fault or defect specifically brought to the attention of the puchaser prior to purchase.

7. Definitions
The following definitions are for the purpose of this warranty.
(a) Manufacturer - means Superior Tank Supplies Pty Ltd
(b) Tank - means the polyethylene tainwatr tank produced by the manufacturer
(c) Warranty - means this written warranty
(d) Purchase Date - means the original date purchased by the purchaser
(e) Purchase Price - means the actual price paid by the purchaser

Site Prepatation and Maintenance Guidlines

Polyethylene tanks will expand when filled. Allowances for this expansion is required when all plumbing work is carried out. Your Superior Polyethylene tank requires very little maintenance, simply check the site for any erosion and clean leaves and debris from the roof, inlet and overflow screens at regular intervals.

1.Ensure that when selecting a site for your tank that the ground is leve and is free of soft spots. ensure that there are no foreign objects such as rocks, stones, tree roots or any sharp materials. Do Not locate near a retaining wall or embackment without first consultng a professional engineer to ensure the ground is capable of supporting the weight of the full tank and base.

2. Spread and level about 35mm of crusher dust over the level ground and place tank directly upon this material .
Make sure the base material is greater tan the tanks diameter.

3.Ensure the material under the tank cannot be washed away. This can be acheived by retaining it with some form of retaining structure,such as, cement strips, rocks or sleepers.

4. If placing the tack on a stand ensure the stand is designed to carry the weight of a full tank and tthat the support slats are no further than 50 mm apart.

5.Plumb all piping away from the base and ensure the piping is supported. Do not forget to use a flexible hose ot coupling to ensure no strain on the fittings or tank.

6.Ensure all overflows are fitted correctly and plumbed away from the tank site to prevent erosion and undercutting of the base.